Product Management Group
← The PMG Journal

Do You Have to Audit Your Supplement Contract Manufacturer? What FDA Expects From Private Label Brands Under 21 CFR 111

What FDA expects from private label supplement brands under 21 CFR 111: who does what, audit options and a 12-point oversight checklist.

Written by the Owner, Product Management Group · 30+ years in consumer product manufacturing

Published

Laboratory technicians working with testing equipment in a quality control lab
Photo by xing bowen on Unsplash

Short answer: FDA's CGMP rule doesn't name a required audit format, but a brand that sells a supplement under its own label can't hand off responsibility to its manufacturer. FDA's compliance guide says a distributor that contracts out manufacturing "has an obligation to know what and how manufacturing activities are performed" so it can decide whether to approve and release the product. In practice, that means documented oversight: specifications, records you review, and an audit or equivalent check.

Definition you can quote: An own-label distributor is a company that sells a dietary supplement under its own brand name while another firm manufactures it. It doesn't run the production line, but under FDA's guidance it still has to understand how the product is made and decide whether each lot is fit to release.

Who does the supplement CGMP rule cover?

The rule is 21 CFR part 111. Section 111.1 says "you are subject to this part if you manufacture, package, label, or hold a dietary supplement," and section 111.3 defines "you" as "a person who manufactures, packages, labels, or holds dietary supplements."

FDA's Small Entity Compliance Guide (December 2010) adds the key principle: "The DS CGMP rule requires you to comply with those provisions directly applicable to the operations you perform." So the manufacturer owns the production requirements, and the brand owns the requirements tied to what it does: buying, labeling decisions, releasing product and distributing it.

What does FDA say about brands that contract out manufacturing?

The compliance guide works through examples, citing the preamble to the 2007 final rule (72 FR 34752, at 34790). For a distributor that contracts with a manufacturer and sells the product under its own label, FDA says the distributor "has an obligation to know what and how manufacturing activities are performed." The guide ties that to two decisions the brand makes: "whether the packaged and labeled product conforms to its established specifications" and "whether to approve and release the product for distribution."

For a manufacturer that has another firm package or label its product, the same guide says the manufacturer "is ultimately responsible for the dietary supplement it releases for distribution." Industry publications quote FDA warning letters to own-label distributors in the same spirit, for example: "Although your firm may contract out certain manufacturing operations, it cannot contract out its ultimate responsibility" (as quoted by Certified Laboratories; the letter isn't named there).

The takeaway for a private label brand: "my manufacturer is GMP" is a starting point, not the whole answer. You need your own evidence that you know how the product is made.

Who does what: manufacturer vs. brand

TaskContract manufacturerYour brand (own-label distributor)Where it comes from
Identity test on each dietary ingredient before useDoes it: "at least one appropriate test or examination to verify the identity of any component that is a dietary ingredient"Asks to see the result or the method21 CFR 111.75(a)(1)(i)
Specifications for components, in-process steps and finished productSets them for what it manufacturesAgrees on finished-product specifications it will release against21 CFR 111.70
Label and packaging specificationsApplies the specified label and packagingOwns label content; confirms the right label went on21 CFR 111.70(d), (g)
Knowing how the product is madeDocuments it (master and batch records)"has an obligation to know what and how manufacturing activities are performed"FDA Small Entity Compliance Guide
Approve and release for distributionReleases its own operationsDecides "whether to approve and release the product for distribution"FDA Small Entity Compliance Guide; 21 CFR 111.127(h)
Records retentionKeeps its CGMP recordsKeeps its own records (specs, release decisions, distribution)21 CFR 111.605

This is a typical split, not a legal allocation. Your quality agreement should spell out who does each task for your product.

Bottles being filled on an automated production line
Photo by Mina Rad on Unsplash

The Know-How-Release Test: three questions to answer for every product

We use a simple three-question test, built on FDA's own words, when a brand asks whether its oversight is enough:

  • Know: Can you show, on paper, who makes the product, where, and with which certifications? (Facility name and address, registration, GMP certificate, the quality contact.)
  • How: Have you seen how it's made? (The master manufacturing record summary, the batch record for your first lot, how ingredient identity is tested, and the finished-product tests on the certificate of analysis.)
  • Release: Who in your company says yes or no to each lot, against which written specification, and where is that decision recorded?

The Know-How-Release Test

1. Know

Can you show, on paper, who makes the product, where, and with which certifications?

FDA phrase: “has an obligation to know what … manufacturing activities are performed”

2. How

Have you seen how it's made?

FDA phrase: “to know what and how manufacturing activities are performed”

3. Release

Who in your company says yes or no to each lot, against which written specification, and where is that decision recorded?

FDA phrase: “whether to approve and release the product for distribution”

Based on FDA's Small Entity Compliance Guide (December 2010), citing 72 FR 34752

If any answer is "the manufacturer handles that," that's the gap an FDA investigator or a retailer's quality team is likely to ask about.

Ask about your product

Have a product in mind? Ask us directly.

Tell us what you want to make and we'll reply with an honest first read.

Ready to price your product? Start a Project →

Do you need an on-site audit, or is paperwork enough?

Part 111 doesn't prescribe a specific audit method for brands, so brands meet the "know what and how" expectation in different ways. The right level depends on your risk: new manufacturer, new format, high-risk ingredients, retail or Amazon requirements, or past problems.

LevelWhat it involvesGood forLimits
1. Document reviewGMP certificate, facility registration, sample COA, quality agreement, master record summaryEvery relationship, as the baselineYou see only what's sent
2. Questionnaire + remote reviewWritten supplier questionnaire, video walk-through, review of your first batch recordStock formulas, lower-risk formatsHarder to see the floor
3. On-site audit (you or a consultant)Walk the line, sample records, check identity testing and releaseCustom formulas, new manufacturers, retail launchesCost and time
4. Third-party audit or certification reportRecent independent GMP audit report shared with youBrands without in-house quality staffCovers the facility, not your specific product
Hands writing on a clipboard during a manufacturing audit
Photo by Zulfugar Karimov on Unsplash

Contract Manufacturer Oversight Checklist (12 points)

Download the fillable checklist (PDF)

  • Facility name, address and FDA registration on file
  • Current GMP certificate (and who issued it, and when)
  • Named quality contact at the manufacturer, and a named person at your brand responsible for quality decisions (111.12(b): "You must identify who is responsible for your quality control operations")
  • Signed quality agreement listing who tests, who releases and who handles complaints
  • Written finished-product specification for your SKU (identity, strength, limits for contaminants)
  • Label and packaging specification you approved
  • How dietary ingredient identity is verified (method and example result)
  • Master manufacturing record summary for your product
  • Batch record for your first lot, reviewed by you
  • Certificate of analysis for every lot, checked against your specification
  • Your written release decision for every lot, dated and signed
  • Records kept for at least 1 year past the shelf life date (if you use shelf life dating) or 2 years beyond distribution of the last batch (21 CFR 111.605)

Key rules

  • Part 111 covers anyone who manufactures, packages, labels or holds a dietary supplement (21 CFR 111.1).
  • You comply with the provisions "directly applicable to the operations you perform" (FDA Small Entity Compliance Guide).
  • An own-label distributor "has an obligation to know what and how manufacturing activities are performed" (FDA Small Entity Compliance Guide, citing 72 FR 34752).
  • Dietary ingredient identity needs "at least one appropriate test or examination" before use (21 CFR 111.75(a)(1)(i)).
  • Quality control includes "Approving for release, or rejecting, any packaged and labeled dietary supplement" (21 CFR 111.127(h)).
  • CGMP records: 1 year past shelf life date, or 2 years beyond distribution of the last batch (21 CFR 111.605).

How does this work with PMG?

PMG's products are made in FDA-registered, GMP-compliant partner facilities, as described on our Certifications & Compliance page. Ask us for the documents in the checklist at the start of a project rather than after the first run. If you're moving an existing product, our switching manufacturers page explains what to send. For the records behind every batch, see What Is a Master Manufacturing Record? and for reading lot results, What Should a Supplement COA Show?

FAQ

Does FDA require private label supplement brands to audit their manufacturer?

Part 111 doesn't spell out an audit format. FDA's guidance says a brand that contracts out manufacturing must know what and how manufacturing is performed and decide whether to release each product. An audit, remote review or third-party audit report is how brands usually show that.

Is my manufacturer's GMP certificate enough?

It's a good start, but it covers the facility, not your product or your release decision. You still need your own specification, a review of your batch records and COAs, and a recorded release decision.

Who tests the ingredients, the brand or the manufacturer?

The firm that uses the component must verify the identity of each dietary ingredient before use (21 CFR 111.75). That's usually the manufacturer. Brands should ask to see how it's done.

How long should a brand keep supplement records?

Part 111 requires records to be kept for 1 year past the shelf life date if shelf life dating is used, or 2 years beyond the date of distribution of the last batch (21 CFR 111.605).

Do I need a quality agreement?

Part 111 doesn't name one in the sections cited here, but a written quality agreement is the clearest way to record who tests, who releases and who handles complaints for your product.

Glossary

  • CGMP: current good manufacturing practice; for supplements, 21 CFR part 111.
  • Own-label distributor: a company that sells a supplement under its brand while another firm makes it.
  • Specification: the written limits a component or product must meet.
  • Master manufacturing record (MMR): the written recipe and process for a product.
  • Batch record: the record of how one specific lot was made.
  • Certificate of analysis (COA): test results for a lot against its specification.
  • Release: the documented decision that a lot can be distributed.
Ask about your product

Have a product in mind? Ask us directly.

Tell us what you want to make and we'll reply with an honest first read.

Related reading
Testing & quality

What Is a Master Manufacturing Record for Supplements? What 21 CFR 111 Requires, How It Differs From a Batch Record, and What Your Brand Should Ask For

What 21 CFR 111 requires in a supplement master manufacturing record and batch record, who is responsible, and what to ask your manufacturer.

Read the article →
Testing & quality

What Does Amazon Require Before You Can Sell a Private Label Supplement? TIC Testing, GMP Proof and Who Does What

What Amazon requires before you list a private label supplement: TIC verification, no direct COAs, GMP proof, and who does what. Plus a checklist.

Read the article →
Testing & quality

Turnkey or Consigned Ingredients? Should You Supply Your Own Raw Materials to a Supplement or Skincare Manufacturer?

Turnkey vs consigned ingredients for supplement and skincare brands: what FDA's GMP rules require, hidden costs, and a 10-point readiness checklist.

Read the article →
Cost planning

What Should You Send a Contract Manufacturer to Get an Accurate Quote? A Product Brief Checklist for Supplement and Skincare Brands

The 9-line product brief for an accurate supplement or skincare manufacturing quote: claims, quantity, packaging, testing, channels and budget.

Read the article →
Cost planning

How Do You Price a Private Label Supplement or Skincare Product? Cost per Unit, Margins for Amazon, Retail and DTC

Turn your cost per unit into a shelf price: what you keep on Amazon, your own site and in retail, keystone vs margin, and a pricing checklist.

Read the article →
Claims & compliance

What Happens If Your Private Label Supplement or Skincare Product Has to Be Recalled? Lot Codes, FDA Recall Classes and a Recall-Ready Checklist

What happens if your private label supplement or skincare product is recalled: FDA recall classes, lot code rules, who acts and a recall-ready checklist.

Read the article →
Claims & compliance

Can You Put “Made in USA” on a Private Label Supplement or Skincare Product? The FTC’s “All or Virtually All” Test, Qualified Claims and a Checklist

Can a private label supplement or skincare product say Made in USA? The FTC’s 3-part test, qualified claims, California’s rule and a sourcing checklist.

Read the article →
Volume planning

What Changes When You Scale a Private Label Supplement or Skincare Product From Your First Run to 10,000+ Units?

What changes when you scale a private label supplement or skincare product past your first run: batch records, FDA listings, lead times and per-unit cost.

Read the article →
Claims & compliance

Can a Spa or Med Spa Launch Its Own Private Label Skincare Line? Claims, Labels, MoCRA Rules and Minimums

How a spa or med spa launches its own skincare line: which claims make it a drug, what the label needs under MoCRA, professional-use rules and PMG minimums.

Read the article →
Formulation & labeling

Capsules, Tablets or Stick Packs? How to Choose a Private Label Supplement Format (Minimums, Testing and Label Rules)

Capsules, tablets or stick packs (sachets)? Compare minimums (from 1,000 units at PMG, varies by format), label wording, testing and FDA rules before choosing a format.

Read the article →
Launch planning

What Do Retailers Require Before They Stock Your Private Label Supplement or Skincare Product? Barcodes, Insurance, Testing and Audits

Barcodes, liability insurance, FDA filings, test results and routing guides: the 6 checks retailers run before stocking your private label product.

Read the article →
Claims & compliance

Does Your Private Label Supplement or Skincare Product Need a Prop 65 Warning? Who Decides, What It Says and the 2025 Short-Form Rules

Does your private label supplement or skincare product need a Prop 65 warning? Who's responsible, what it must say, the 2025 short-form rules and a checklist.

Read the article →
Testing & quality

How Long Does Stability Testing Take for a Private Label Skincare Product? Accelerated vs Real-Time, Challenge Tests and Shelf Life

Accelerated stability testing typically runs about 3 months at PMG, with real-time testing to confirm shelf life. What cosmetics and OTC drugs need.

Read the article →
Claims & compliance

What Should a Supplement Certificate of Analysis (COA) Show? A Line-by-Line Guide for Private Label Brands

What a supplement certificate of analysis must show under 21 CFR 111: methods, limits, actual results, identity and heavy metals, plus a printable checklist.

Read the article →
Claims & compliance

Which Certifications Should a Supplement or Skincare Manufacturer Have? cGMP, NSF, USP, Organic, Kosher and Halal Explained

Certifications a supplement or skincare maker needs: what FDA requires, what NSF, USP and ISO 22716 audits prove, and organic, kosher, halal rules.

Read the article →
Claims & compliance

What Has to Be on a Private Label Supplement Label? Supplement Facts, Claims, Disclaimer and Allergens

What a private label supplement label must include: 5 required statements, Supplement Facts rules, the claims disclaimer, allergens and adverse event contact.

Read the article →
Claims & compliance

Who Is the Responsible Person Under MoCRA When You Private Label a Cosmetic?

Under MoCRA, the company named on a private label cosmetic's label is the responsible person. See who registers, lists and reports adverse events.

Read the article →
Claims & compliance

Is Your Massage Oil or Muscle Rub a Cosmetic or an OTC Drug?

When a massage oil becomes an OTC drug: claims, FDA M017 menthol and camphor levels, child-resistant packaging, Drug Facts, minimums and timelines.

Read the article →
Hospitality

Can You Private Label Hotel Amenities? Body Wash, Shampoo and Lotion for Boutique Hotels and Spas

How boutique hotels and spas private label body wash, shampoo and lotion: minimums, timelines, state small-bottle laws and what the label must include.

Read the article →
Launch planning

What Is a Pilot Batch, and Can Your First Production Run Be Under 1,000 Units?

Lab sample vs pilot batch vs first production run, why tiny runs cost more per unit, six realistic options below 1,000 units, and a downloadable readiness checklist.

Read the article →
Claims & compliance

Can You Private Label Essential Oils and Aromatherapy Kits for Amazon?

How claims set the FDA category, what Amazon hazmat review needs, when caps must be child-resistant, and PMG's minimums.

Read the article →
Formulation & labeling

Can You Make Sugar-Free Pectin Gummies with Allulose?

How the gel changes without sugar, allulose vs sugar alcohols vs monk fruit and stevia, what a sugar-free label needs, and realistic minimums.

Read the article →
Partner selection

How to Choose a Private Label Manufacturing Partner

10 questions to ask before you sign, plus a free evaluation checklist.

Read the article →
Volume planning

MOQ and Manufacturing Volume: What Actually Matters

Why minimums exist, what they cost below volume, and how to plan a first run you can sell through.

Read the article →
Cost planning

How Much Does It Cost to Manufacture Supplements?

A phase-by-phase breakdown of R&D, ingredients, production, packaging, and compliance costs.

Read the article →
OTC & regulatory

What Does It Take to Manufacture an OTC Acne Product?

Allowed actives and strengths, Drug Facts labeling, NDCs and registration, and realistic OTC minimums and timelines.

Read the article →

Sources

  1. 1.FDA, Small Entity Compliance Guide: Current Good Manufacturing Practice in Manufacturing, Packaging, Labeling, or Holding Operations for Dietary Supplements (December 2010) https://www.fda.gov/regulatory-information/search-fda-guidance-documents/small-entity-compliance-guide-current-good-manufacturing-practice-manufacturing-packaging-labeling
  2. 2.21 CFR 111.1 and 111.3 https://www.ecfr.gov/current/title-21/section-111.1 and https://www.ecfr.gov/current/title-21/section-111.3
  3. 3.21 CFR 111.70 https://www.ecfr.gov/current/title-21/section-111.70
  4. 4.21 CFR 111.75 https://www.ecfr.gov/current/title-21/section-111.75
  5. 5.21 CFR 111.127 https://www.ecfr.gov/current/title-21/section-111.127
  6. 6.21 CFR 111.605 https://www.ecfr.gov/current/title-21/section-111.605
  7. 7.Certified Laboratories, "Own-label distribution" (secondary source for warning-letter wording) https://certified-laboratories.com/blog/own-label-distribution/

Fact-checked: 19 claims verified against sources; 6 adjusted.

Companion checklist

Contract Manufacturer Oversight Checklist

A printable 1-page checklist with all 12 contract manufacturer oversight points.

PDF · 1 page

About Product Management Group

PMG is a full-service private label manufacturing partner for skincare, nutraceuticals, supplements, personal care, and wellness brands. We handle everything from R&D and formulation through manufacturing, packaging, regulatory compliance, and fulfillment, working with FDA-registered, GMP-compliant partner facilities in Florida, North Carolina, Texas, Minnesota, and Arizona. We work with everyone from first-time founders to established retail brands, with minimums starting at 1,000 units.

Start a Project →